Learn About The Conductor Plate and Reasons Why Mercedes Benz Not Get Started

The transmission conductor plate is an integral part of the automatic transmission assembly. Multiple transmission components are mounted, including shift control valves, speed sensors, and pressure relief valves. You can find the transmission conductor plate on the valve body of the automatic transmission.

The Mercedes-Benz 5G-TRONIC, also known as the 722.6, is an electronically transferred 5-speed overdrive automatic transmission.

It has been used by various automakers, including Mercedes-Benz, Chrysler, Jeep, Jaguar, Ssangyong, and Dodge. It uses only three planetary gear sets while the computer can command five forward speeds and two ratios for reverse.

Conduction is achieved by the control of six solenoids located on a Mercedes conductor plate. It is connected to the valve body inside the transmission.

The hydraulic valve body operates and directs fluid pressure to the three holding clutches, torque converter lock-up clutch, and three driving clutches allowing for flat shifting.

Common faults of Mercedes conductor plate include:

  • Transmission holding in gear
  • Transmission flaring or slipping between gear changes
  • Loss of all drive

There may be other failures of the conductor plate, some of which are also repairable. Skilled Mercedes specialists in Los Angeles are capable of fixing these faults quickly.

Reasons Why Your Mercedes Benz Won’t Start

If your Mercedes Benz vehicle does not start, there are some troubleshooting you can do to avoid Mercedes Benz repair charges. However, before you try to fix the problem yourself, there are a few conditions that need to be met first, such as:

  • Your vehicle should have fuel
  • Your Mercedes Benz should spark
  • Mercedes Benz Drive Authorization System should start
  • It should have electrical power to crank the engine.

You would know that your Mercedes Benz won’t start if:

  1. the engine dies after starting
  2. your vehicle turns over, but it won’t start
  3. you hear a clicking sound, but it won’t start
  4. you inserted the key in the ignition, but it won’t start
  5. the engine clicks, but it won’t start

Reasons why your Mercedes Benz won’t start:

Battery. The most evident reason is that the battery may already be very old. Most vehicle owners change the battery after ten years of use, but the replacement should be considered before 6 to 7 years.

If you have a comparatively new battery, but the car engine does not start, then use a 12-volt trickle charger to charge your battery.

Fuse and relays. If there is no battery problem, the fuse on your starter circuit, ignition, EIS, or fuel pump should be checked. Remember that this is a specific vehicle system breakdown. It is the fuse that takes all the brunt and burns out. After testing the fuse using a digital multimeter, make sure you replace it with the same ampere fuse as the original fuse.

Brake Light Switch. If your Mercedes Benz drive authorization system does not allow you to start your car, it is more likely that your brake light switch is bust.

Gear Selector Module. If you do not see a change from the letters P to R to N on the instrument cluster when you move the shifter from park to reverse to neutral, the gear selector module may be faulty.

Crankshaft position sensor.

By experiencing few things given below, you would know that you have a faulty crankshaft position sensor:

  • the car misfires
  • the check engine light turns on
  • the car intermittently starts
  • there is hesitation when it starts
  • the engine stalls
  • the engine vibrates

If you experience any of these issues, you must get the help of Mercedes specialists in Los Angeles to replace the sensor.

The key will not turn on the ignition/driver authorization system. If your key does not turn, the most likely scenario is that the battery is completely or partially discharged because this will not allow the Electronic Ignition System (EIS) to work properly. Make sure your battery functions perfectly.

New Mercedes-Benz automobiles with SmartKey will not start when its Driver Authorization System fails, mainly when the battery is partially or fully discharged. You can fix the issue of the mercedes airmatic suspension repair in tarzana with a skilled Mercedes mechanic.