Ultimate Beginner’s Guide to Polishing Pads – Fix Your Paint the Right Way

If you’re determined to restore the shine to your clear coat, or any shiny surface, you’ll need to be familiar with buffing pads.

These small round marvels are the essence of working smarter, not working harder!

What is a Buffing Pad?

Buffing pads comprise circular pads that are used to polish paints and other materials that are hard. They are also employed to apply wax, sealants as well as other coatings. The majority of pads are composed of foam, but they could be also made from wool or microfibers or a mix of all three.

Some pads are designed to be used manually, but they are mostly designed to be used in conjunction with an equipment like the Dual Action (DA) Orbital Polisher or Rotary Buffer. They are available in a range of shapes and sizes for various purposes. The most popular pad is circular pads, such as Mix and match Polishing pads. These are also among the top pads for novices to begin with as they are more tolerant of usage and in the care.

What Do I Need to Attach My Buffing Pad to My Polisher?

Buffing pads are connected to polishers using the backing Plate. This is a polymer or rubber disk with an arbor with threads to one end (to screw onto or into the spindle of your polisher) and an hook-and-loop (Velcro) side on the opposite side (to attach the pads).

DA polishers have backing plates with an arbor with a male thread to attach to the polisher. Rotary polishers utilize an arbor that is female threaded to attach to your polisher.

DA Polishers such as those of the Harbor Freight 6” Polisher and Griot’s Garage 6 Polisher are equipped with the backing plate. All you need to do to run pads on them is to purchase an 8-inch pad. If you’d like to use smaller pads like the standard pads that measure 5” in diameter, you’ll have to buy smaller backing plates like this Mix and match Polishing pads. It is also possible to purchase this handy Mix and match Polishing pads that includes five feet of backing plate, as well as a selection of the most commonly used 5” pads.

This Porter Cable 7424xp, at the time of writing, doesn’t come with a backing plate to run foam pads. You’ll need to purchase one like the Meguiar’s 5” DA Backing Plate that was mentioned earlier. You may purchase the polisher in conjunction with backing plates (usually five inches). ”).

How are Buffing Pads Made?

Most buffing pads consist of two different materials that are joined. The primary component is typically foam, which holds the polish in place and will also touch the paint trolleys online. The second substance is the backing (usually hooked and loop, also known often as Velcro) which lets the pad stick on the plate that is on the polisher, and then be removed. Pads made of wool or microfiber will typically contain the fiber that is glued on a foam base that is then fixed to the Velcro backing.

What Makes a Quality Buffing Pad?

  • A flexible and strong design of the primary material such as microfiber, foam or wool that doesn’t break down when used
  • Excellent adhesion of the back material to the pad
  • Material construction that permits an airflow as well as spent polish removal
  • Clear labeling or different colors to differentiate different kinds of pads
  • Warranty provided by the manufacturer in the event that the pad malfunctions before it is time (it occurs even to the most reliable pads at times)

What kinds of Buffing Pads Are there?

There are three major categories of pads. There are wool, foam as well as microfiber polishing pads. All of them can be used with either a Dual Action Orbital or Rotary Polisher in the event that they have the same or slightly bigger, size of the base plate of the polisher of your choice.