Workplace Safety – Mitigating Fire Hazards at Workplace

Fire is a typical occurrence in any industry; none of us are immune to it or can afford to ignore it in our homes or offices. Several firefighting companies in UAE are working to address the clients fire risks and provide advice and recommendation to their clients. A specific Fire Risk Assessment for the workplace is required by law, and is the first step in evaluating the current fire safety safeguards and where they can be  improved.

In simple terms, we can say that Fire Safety has several factors:

  • Preventing a fire from starting
  • Ensure you have correct procedures for the fire emergency
  • Ensuring that the fire is noticed so that everyone has a better chance of escaping
  • Ensuring that the fire is controlled so that people can escape and the building and equipment are not damaged

Fire Prevention: This is the an important step – guaranteeing that persons may escape the fire is important – but the hazards are greatly reduced if we can stop a fire in the early stage and .

Fire prevention — Fire prevention is more complex than we can explain in a blog – but the basic and obvious controls are for the management of heat sources, flammable items and fuel in the workplace. There are many fire fighting companies in Dubai who provide expert advice and other related services to enhance the ability of clients to

  • Smoking is now clearly banned on the world stage, therefore many of the ancient causes are no longer a factor.
  • Heat sources – particularly those with open fire, such as space heaters – have to be controlled – obviously anything that is flammable or fuel must be kept away.
  • Flammable materials, including most aerosols, need to be careful because the flammable products can be ignited, without a flammable fire, so that they must be maintained in cool and safe locations. It should be maintained in appropriate containers and minimised quantities in the area of work – inventories in flammable cabinets should be stored.

Stopping Fire Spread:

The steps to stop fires also help lessen the risks when a fire begins.

  • Fire Loading is the expert reference — which means how much stuff in a structure will burn. The larger the fire load, the more things can be burned. Wood, cables and paper have to be ignited by a flaming flame or great heat – yet if a fire starts, that fire will feed and fire to develop, the more fuel on site it is vital to find other ways of preventing fire spread.
  • Fire Doors – there are fire-protecting doors, which work for 30 minutes or more, by sitting at fire walls with a fire to a smaller area. They are important to be kept closed or automatically fitted with closing systems. Only when left open fire will you spread it and diminish your safety and safely minimise the amount of time you spend evacuating.

Fire Detection:

Automatic systems help reduce fore risks as they work 24 hours a day and should cover the entire workplace – they need to be maintained on a regular basis – at least annually.

In case of the fire it allows others to notify you that the fire has happened, call points – the bright glass fire call points should be dispersed throughout the building and every fire exit should have a glass break point near it too. These ought again to be monitored and tested regularly.

Fire Evacuation:

When a fire alarm comes on, key personnel can escape and visitors can escape. Depending upon different conditions there are maximum distances – and if you are in doubt, specialist guidance may be needed.

But working through the basics:

  • Two output routes should always be available in general So you have a second alternative when you have one blocked by fire. This isn’t all of the older buildings.
  • Make sure that any evacuation route is clear and available – walks and checks should be done weekly to ensure that nothings are obstructed or locked. Likewise given that they exist, you must ask if it is wise to keep anything in them.
  • Fire exits from every stage should lead to a protected path – these are spaces that are pretty safe once you are inside, therefore they will have at least one set of fire doors heading into them and normally sit with fire walls in front of them.
  • A procedure to ensure that everyone is clear is needed. Old fashioned telephone conversations are particularly valuable in tiny organisations, but are limited to large companies or to visitors. Fire Wardens are usually a more efficient option – even if their responsibilities need to be taught and well informed. They swamp their building in basic terms, confirming that everyone has departed and then reporting to the head or Fire Brigade.

Fire fighting contractors in Dubai may offer more elaborate systems like Smoke Vents are available which can promote safe evacuation, but need expert support in the design and installation.

Fire Fighting:

These can be essential for fire safety but you should also try, in most situations, to withdraw workers from combating fire. Sprinklers are automatic now and do not need human input, thus they are quite safe.

  • Regular fire extinguishers must be placed – however two extinguishers prominently positioned should be placed at every fire exit. These must be kept and records maintained
  • Fire Hoses can have their worth, but they need training again in order to operate efficiently and safely and need to continue.

Ray-Forceis among leading fire fighting companies in dubai  their Fire Risk Assessment allows you to fully take all the factors into account and identify a suitable series of precautions; for small businesses this can be accomplished quickly using resources provided by the local brigade. Often, your safety consultant or counsellor can offer general advice and assistance to larger companies.